Anchor Chair™ - For 3/8" FRP Rebar
Avaliable heights - 2” / 3”
Patent pending design
Secures the intersect, replacing the need for tie wire
Concrete fills chair’s void, anchoring the chair to grade
For use in slab on grade or foundation footers
Plastic Slab Bolster
Available heights – ¾” / 1” / 1.25” / 1.5” / 1.75” / 2” / 2.25” / 2.5” / 2.75” / 3”
30” lengths
Slab Bolsters can be extended to longer lengths through its snapped locking system
The pointed tips allow minimum point of surface contact
Ideal for pouring precast, poured decks, tilt-up and other structures that require additional rebar reinforcement
Grade Chair with Base (THE PCGCB)
Each chair comes with two height options
Available heights – 1.5”-2”/ 2.5"-3”/ 3.5”-4”/ 4.5"-5"/5.5"-6"
Max bar size #8
800+ lbs. load bearing
Made from polymeric carbon abs material
Wide base allows for solid footing
F-Chair
Chair comes with two height options
Available heights – ¾”/ 1”
Max bar size #6
Wide base allows for solid footing
H-Chair-6 Leg
Available heights – 1” / 4.5” / 5”/ 5.5” / 6”
Max bar size #11
800 lbs. Load Bearing
Unbeatable design, strong and stable, due to that the same axle has two points for bar support
Suggested for multiple applications – concrete slabs, precast, tilt-up and concrete finish
H-Chair-4 Leg
Available heights – 1.5” / 2” / 2.5” / 3” / 3.5” / 4”
Max bar size #11
600 lbs. load bearing
Unbeatable design, strong and stable, due to that the same axle has two points for bar support
Suggested for multiple applications – concrete slabs, precast, tilt-up and concrete finish
Tower Chair
Available Heights: 3” to 12-1/4” in 1/4” increments
Stocked in half inch increments between 6.5” to 12”
Works with all sizes of rebar
Suggested applications - concrete slabs, precast, tilt-up, bridge deck, and other heavy applications
Four legs allow easy placements of multiple layers of steel
Speedies®
Fastest, strongest mesh chair available
Available heights - 2"
Mesh gauge: All
Mesh size: 6”x6” or smaller
US Patented
Mesh Chair
With base -- available heights – 1” / 2” / 2.5” / 3” / 3.5”/ 4"/ 4.75"/ 5"/ 6"
Without base-- available heights -- 1"/ 2"/ 2.5"/ 3"
Mesh gauge: 3 – 10
300 lbs. load bearing
Circular base will provide stability and support
Mesh chair is used for welded mesh and installed at four way crossing
Utility Chair
Available heights – 2.25” / 3.25”
Max bar size #4
Stable, light, economic and designed with 2 1/8” base
Used for slab work, precast and tilt-up
Foundation Footer Chairs
Available Sizes:
(RC-6-2) 6” width – 3” height - (RC-12-3) 12” width – 3” height
(RC-18-3) 18” width – 3” height
Max bar size #5
Eliminates tie wire
Dual clamping feature allows overlapping of rebar
RC-6-2 holds 2 pieces of rebar - RC-12-3 and RC-18-3 holds 3 pieces of rebar
Recommended spacing 4 feet
Spacer Wheels
Available sizes - ¾” / 1” / 1.25” / 1.5” / 1.75” / 2” / 2.5” / 3” cover
Has double fastener that works with rebar and welded mesh, maintaining them to the center of the spacer
Minimal surface contact
Spacer Wheel used for walls, columns, beams, cast-in-place and prefabrication
Locking Spacer Wheels
Available sizes - 1” / 1.5” / 2”/ 3”
Works with multiple rebar sizes from #3 to #6
Tension is locked in the zip locking system
Works with precast, vaults, slabs and frames, foundations, forms, bridges, and more.
Drill Shaft Wheel
Available sizes – 2” / 3” cover
Max rebar size 2” #5, and 3”#6
Lateral spacer, impact resistant for heavy and large structures
Provides guide system for reinforcement cages within caissons, drilled shafts and other construction applications
Bar-Boot
Both sizes with 3” cover to suspend cages installations vertically at the base of drilled holes or shafts
Two sizes to accommodate either #3 through #8 rebar, or #8 through #11 rebar
Used in conjunction with the drill shaft wheel
Plastic Stake
18 inches long, used as a grade stake
Max bar size #5
4 different locations for placement of rebar - 9” / 11” / 13” / 16 ½”
Recommended spacing 5 feet
Used in footings and other concrete applications
Pyramid Chair
Available heights-- 1.25"/ 2"/ 2.5"/ 3"/ 3.5"/ 4.5"
Max bar size #4
400 lbs. load bearing
Provides positive lock for quick and easy slab on grade work
Q-Decking Chair
Available heights-- .75"/ 1"/ 1.5"/ 2"
Max bar size #4
400 lbs. load bearing
Provides positive lock for quick and easy slab on grade work
End Spacer
Used in precast application, sloped slab on grade, slab on grade
Either 1” or 1-1/2” cover
Accommodates #3 through #6 rebar
Used as a protective cover for vertical or horizontal application
End Caps
Available sizes – CS075 #3, #6 bar and CS150 #8, #11 bar
Avoids possible knocks and scratches to workers in traffic zones
Used in horizontal applications
OSHA Caps
Safety Orange Color
Octagonal Shape to Attract Job-Site awareness
Works with rebar #3 to #8
Cal/OSHA approved
